Search
Close this search box.

CLASSIC DOWNPIPES

Fittings that make installation of architectural round downpipes quick and easy! Your next project can now benefit from the stylish lines of the Art Plumbing & Bathroomware Classic Downpipe System.
Classic Downpipe System
Product Code: 41101
Product Code: 41102
Product Code: 41103
Product Code: 41111
Product Code: 41301
Product Code: 42701
Product Code: 41201

CLASSIC DOWNPIPES

DESCRIPTION CODE CTN QTY Download PDF
90mm x 45Deg Classic M&M Elbow 41101 80 Download Spec Sheet
90mm x 95Deg Classic M&M Elbow 41102 45 Download Spec Sheet
65mm x 88Deg F&F Elbow 41103 80 Download Spec Sheet
100mm x 85Deg Classic F&F Elbow 41111 24 Download Spec Sheet
90mm Classic M&M Joiner 41201 60 Download Spec Sheet
90mm Stormwater “Classic” M&M Tee 41301 24 Download Spec Sheet
90x30mm Classic Down Pipe Offset 42701 70 Download Spec Sheet
Classic Header
UPVC fittings that make installation of architectural downpipes Quick and Easy! Your next project can now benefit from the stylish lines of the Art Plumbing & Bathroomware Classic Downpipe System.

FEATURE AND BENEFITS

41301

STORMWATER CLASSIC M&M TEE 90MM

Classic to a “T” , the new 90mm Classic M&M Tee brings it all together. Sleek and Stylish, the Classic Downpipe Range gives you invisible joins and a seamless look . UPVC, efficient and easy to install, uses standard 90mm stormwater pipe.

Product Code:
41301 – 90mm Stormwater “Classic” M&M Tee

Search

Head Office

New Zealand

Art Plumbing & Bathroomware NZ
Pty Ltd

Contact Person

Laurence Deadman

OUR LOCATIONS

You may feel free to use our store locator search to help you find the nearest Art Plumbing & Bathroomware Australia stockist.

Contact Us

Please fill out the form with your contact information and a brief description of how we can assist you.

We value your time and will make every effort to respond within 24 hours. Thank you for reaching out to us. We look forward to connecting with you soon.

Contact Info

Contact Person

POP DOWN® INSTALLATION ISSUE

POP DOWN® MECHANISM ISSUE

After the installation of your Pop Down® waste, if you find that it does not hold water when closed there may be an installation issue. A simple test can be conducted to see if water is passing around the waste (in the case of an installation fault), or through the waste, which would be a product fault.

To test, close your Pop Down® waste and partially fill your basin with water. If the water empties from the basin but does not empty from the well above the Pop Down® mechanism, it would suggest an installation fault. In this case you would need to call the installing plumber.

If the water empties from the basin and also empties from the well above the Pop Down® mechanism, it would suggest a product fault. In this case, contact us and we will send a replacement mechanism.