Search
Close this search box.

Plastic Plug and Wastes

Our range of Plastic Plug and Wastes offers a practical solution for managing water drainage in baths, basins, sinks and tubs. The plastic construction of these wastes offers durability and ease of maintenance.
Product Code: 22101.11
Product Code: 22103.11
Product Code: 22103.12
Product Code: 22105.11
Product Code: 22107.11
Product Code: 22107.12
Product Code: 22109.12
Product Code: 22113.11

PLASTIC PLUG AND WASTES

DESCRIPTION CODE FINISH CTN QTY Download PDF
32x90mm P&W with Rubber Plug White 22101.11 White 200 Download Spec Sheet
32x90mm P&W with Rubber Plug W/OF Wh 22113.11 White 200 Download Spec Sheet
40x70mm P&W with Rubber Plug White 22103.11 White 200 Download Spec Sheet
40x70mm P&W with Rubber Plug S/Steel 22103.12 S/Steel 200 Download Spec Sheet
50x50mm P&W with Rubber Plug White 22107.11 White 100 Download Spec Sheet
50x50mm P&W with Rubber Plug S/Steel 22107.12 S/Steel 100 Download Spec Sheet
50x70mm P&W with Rubber Plug S/Steel 22109.12 S/Steel 100 Download Spec Sheet

APPROVED BY:

22207.12
PRODUCT CODE:

22207.12

PLASTIC TOP FIXING PLUG AND WASTES

DESCRIPTION CODE FINISH CTN QTY Download PDF
40mm Top Fixing P&W SS 22202.12 S/Steel 100 Download Spec Sheet
50x40mm Reducing Top Fixing P&W SS 22203.12 S/Steel 100 Download Spec Sheet
50mm Top Fixing P&W SS 22205.12 S/Steel 100 Download Spec Sheet
90x50mm Top Fixing P&W SS 22207.12 S/Steel 50 Download Spec Sheet
40mm Top Fixing P&W SS with 80mm Screw White Plug 22211.12 S/Steel 100 Download Spec Sheet
40mm Top Fixing P&W SS White Plug 22212.12 S/Steel 100 Download Spec Sheet

APPROVED BY:

Contact Us

Please fill out the form with your contact information and a brief description of how we can assist you.

We value your time and will make every effort to respond within 24 hours. Thank you for reaching out to us. We look forward to connecting with you soon.

Contact Info

Contact Person

POP DOWN® INSTALLATION ISSUE

POP DOWN® MECHANISM ISSUE

After the installation of your Pop Down® waste, if you find that it does not hold water when closed there may be an installation issue. A simple test can be conducted to see if water is passing around the waste (in the case of an installation fault), or through the waste, which would be a product fault.

To test, close your Pop Down® waste and partially fill your basin with water. If the water empties from the basin but does not empty from the well above the Pop Down® mechanism, it would suggest an installation fault. In this case you would need to call the installing plumber.

If the water empties from the basin and also empties from the well above the Pop Down® mechanism, it would suggest a product fault. In this case, contact us and we will send a replacement mechanism.